Smoothing Plane 48 mm ( 1.8897 inch )

Artikelnummer
pinie--3A-48
Hersteller
Pinie Lubná, spol. s r.o.
Inhalt
1 piece

30,17

zzgl. 19 % MwSt. zzgl. Versandkosten


Derzeit nicht auf Lager



The wooden Smoothing Plane has a blade with a chipbreaker and is used for fine smoothening or finishing surfaces. The bed angle is 49 degrees. The chipbreaker breaks chips from the planed material and removes them away from the planed surface. The plane is used for the smoothening of both hard wood and veneer surfaces. Whereas the Jack Plane is used for the finishing of soft wood (the blade with the chipbreaker of the Smoothing Plane is inserted at a steep angle to the planed material). The sole is made of high quality hornbeam, the body is made of high quality beech, both are dried down to 10 % moisture content.

 

  • Blade width 48 mm ( 1.8897 inch )
  • Dimensions: 220 x 65 x 140 mm ( 8.6614 x 2.5590 x 5.5118 inch )
  • The bed angle is 49 degrees
  • The sole is made of high quality hornbeam, the body is made of high quality beech, both are dried down to 10 % moisture content
– Es ist noch keine Bewertung für Smoothing Plane 48 mm ( 1.8897 inch ) abgegeben worden. –
Artikel bewerten
1
1
Name Kommentar Sicherheitscode Captchar Image

Zubehör

Bench plane 39 mm ( 1.5353 inch ) – Bild 1
Bench plane 39 mm ( 1.5353 inch ) – Bild 2
Bench plane 39 mm ( 1.5353 inch )

zzgl. MwSt. zzgl. Versand

Jack Plane 48 mm ( 1.8897 inch )
Jack Plane 48 mm ( 1.8897 inch )

zzgl. MwSt. zzgl. Versand

Narex Honing Guide – Bild 1
Narex Honing Guide – Bild 2
Narex Honing Guide – Bild 3
Narex Honing Guide

zzgl. MwSt. zzgl. Versand

Narex Smoothing Metallic plane
Narex Smoothing Metallic plane

zzgl. MwSt. zzgl. Versand

Scrub Plane CLASSIC – Bild 1
Scrub Plane CLASSIC – Bild 2
Scrub Plane CLASSIC – Bild 3
Scrub Plane CLASSIC – Bild 4
Scrub Plane CLASSIC

zzgl. MwSt. zzgl. Versand

Nach oben