Jack Plane 48 mm ( 1.8897 inch )

Artikelnummer
pinie--3-48
Hersteller
Pinie Lubná, spol. s r.o.
Inhalt
1 piece

30,17

zzgl. 19 % MwSt. zzgl. Versandkosten


Derzeit nicht auf Lager



The Jack Plane has a blade with a chipbreaker and is used for fine smoothening or finishing surfaces. The bed angle is 45 degrees. The chipbreaker breaks chips from the planed material and removes them away from the planed surface. The plane is used for the smoothing of soft wood whereas for the finishing of hard wood the Smoothing Plane is used (the blade with the chipbreaker of the Jack Plane is inserted at a steep angle to the planed material). The sole is made of high quality hornbeam, the body is made of high quality beech, both are dried down to 10 % moisture.

 

  • Blade width 48 mm ( 1.8897 inch )
  • Dimensions: 220 x 65 x 130 mm ( 8.6614 x 2.5590 x 5.1181 inch )
  • The sole is made of high quality hornbeam, the body is made of high quality beech, both are dried down to 10 % moisture
  • The bed angle is 45 degrees
– Es ist noch keine Bewertung für Jack Plane 48 mm ( 1.8897 inch ) abgegeben worden. –
Artikel bewerten
1
1
Name Kommentar Sicherheitscode Captchar Image

Zubehör

Bench plane 39 mm ( 1.5353 inch ) – Bild 1
Bench plane 39 mm ( 1.5353 inch ) – Bild 2
Bench plane 39 mm ( 1.5353 inch )

zzgl. MwSt. zzgl. Versand

Narex Honing Guide – Bild 1
Narex Honing Guide – Bild 2
Narex Honing Guide – Bild 3
Narex Honing Guide

zzgl. MwSt. zzgl. Versand

Smoothing Plane 48 mm ( 1.8897 inch )
Smoothing Plane 48 mm ( 1.8897 inch )

zzgl. MwSt. zzgl. Versand

Narex Smoothing Metallic plane
Narex Smoothing Metallic plane

zzgl. MwSt. zzgl. Versand

Scrub Plane CLASSIC – Bild 1
Scrub Plane CLASSIC – Bild 2
Scrub Plane CLASSIC – Bild 3
Scrub Plane CLASSIC – Bild 4
Scrub Plane CLASSIC

zzgl. MwSt. zzgl. Versand

Nach oben